Thank you for purchasing the Zaquencer Firmware for your BCR2000!

1. Installation
===============

Please note that with installing the firmware to your BCR2000:

- you will VOID YOUR WARRANTY with Behringer for the device

- you will ERASE ALL THE FLASH MEMORY. 
Please backup all the mappings you might have made.

The Zaquencer Firmware is only intended for use on the 
Behringer BCR2000 (does not work on BCF2000 or any other device).

For more info regarding the installation process see:
https://zaqaudio.com/forums/topic/installation


2. Authorization
================

The Zaquencer Firmware is copy-protected.
The authorization can be completed on zaqaudio.com immediately after upload of the firmware.
One purchased license will authorize exactly one device.
It is not possible to transfer the license between different BCR2000 devices.

For more info regarding the authorization process see:
https://zaqaudio.com/forums/topic/authorization-instructions


3. Usage
========

Please check this post for help getting started:
https://zaqaudio.com/forums/topic/sticky-usage-getting-started



If you have any questions, please write in the support forum at
https://zaqaudio.com/forums/forum/support


Have fun with your Zaquencer Firmware!



===================================================================
https://zaqaudio.com
